Other Utility Mill scipts

-
I have made several utility mill scripts in the past and since I am reminded of it again, I might as well post links to my other utilities. Hopefully, someone will find it useful:

Comments

Post a Comment

Popular posts from this blog

Repairing Roomba charging circuit

-
Image
Sometime ago, a colleague told me that she bought a Roomba 405 but the battery seems dead, unable to charge. Being the curious me and how I like to fix things, I made a deal that if I could fix it, I can use it to clean my house for 1 month :-) So, this post is a sharing and also a kind of documentation for myself on how I got the Roomba working again. Initial diagnosis.... So, the next day she brought the Roomba to me in office and I took it home. First step, I tried to charge it by connecting the AC-DC adapter to the robot. According to the user manual, it seems charging. The amber LED is blinking slowly. A few hours later, I detached the power and try to see if it moves by pressing the "Clean" button. Nope, it is dead as a log. So, next step, I took my multimeter, removed the battery and measured the battery terminal voltage. Huh, it reads approx 0.6V? Now, I gotta monitor the voltages while charging to figure out what's wrong. I attached 2 thin wires to the terminals,...
Read more

VirtualBox Hardware Virtualization and Nested Paging

-
Recently discovered that I could enable nested paging for Virtualbox 2.1. Nested paging is a new hardware virtualization extension on AMD K10 Barcelona/Phenom and Intel Core i7 Nehalem processors that allows processor to offload memory paging required by the guest OS that is traditionally done by the VM with shadow paging. Since it is a new feature, it is not available in the configuration UI yet. First, you will have to enable hardware virtualization (VT-x/AMD-V) in Settings -> Advanced. Then, nested paging can be enabled as described in the VirtualBox User Manual with the following command: VBoxManage modifyvm -nestedpaging on The performance boost is quite noticeable. The boot up time for my virtual Windows XP has drop from about 25 seconds to 18 seconds. Super PI Mod has dropped from 39.159s to 36.016s Various benchmarks on the net show performance boost up to 30%. I'll run more benchmarks next time.
Read more

OpenCL on Ubuntu 24.04 with open source drivers only

-
Running OpenCL on Linux with older AMD GPU (not supported by ROCm) has been mostly disappointing. Recently, I've stumbled upon Rusticl which an OpenCL implementation on Mesa Galium driver. However, my current Ubuntu 24.04 does not come with latest mesa packages and I'd prefer to not install kisak-mesa PPA which can sometimes mess up the system when upgrading Ubuntu. It seems that Fedora comes with latest Mesa packages with rusticl enabled and I found this blog describing how to install the required packages: https://nullr0ute.com/2023/12/getting-started-with-opencl-using-mesa-rusticl/ Based on that, I've found a way to use OpenCL with rusticl within podman/docker container. Here's the Dockerfile: FROM fedora ENV RUSTICL_ENABLE=radeonsi ENV http_proxy=http://192.168.0.130:3128/ RUN dnf install -y mesa-libOpenCL mesa-dri-drivers spirv-llvm-translator spirv-tools-libs clinfo clpeak RUN cd /root && \     curl -L https://cdn.geekbench.com/Geekbench-6.3.0-Linux.tar....
Read more